Nitrile Coated G10 Isolating Gaskets/Kits (RC Gaskets)


Nitrile Coated G10 Isolating Gaskets/Kits (RC Gaskets)

Nitrile coated G10 isolating gaskets are coated with a nominal .063”(1.5mm) nitrile coating on each side of the G10 core from the ID to the OD of the gasket. The total gasket thickness is a nominal .187” ( 5mm).  All contact areas of the gasket are effectively a sealing point. The gasket requires more load to seal than a  LineBacker or PGE gasket, but will perform well where pitted flanges, warped flanges or non-parallel flanges (such as non-metallic flanges with molded, concentric convex rings) exist.


  • Great for non-potable water applications
  • Great for non-metallic flanges


  • .063” thick G10 core with .063” thick Nitrile (NBR) coating on each side, overall compressed thickness 0.187″
  • Temperature rating: -50°F (-46°C) to 230°F max (110°C)


  • Non-potable water
  • Utility gas applications
  • Aliphatic hydrocarbons